http://www.underwaterphotography.com/http://www.underwaterphotography.com/en-us© UnderwaterPhotography.comUnderwater Photography3/20/2010 8:22:48 AMhttp://www.underwaterphotography.com/store/product.aspx?p=2840010/10/2008 3:56:00 AMhttp://www.underwaterphotography.com/store/product.aspx?p=26588The FD-40X housing is rated to a depth of 200 feet (60m). The main seal between front and back halves is a gasket seal. The lens port attaches with a double O-ring seal for double protection. The camera “slides” into the FD-40X housing on a specially designed tray. Once inside the housing the stainless steel latching buckles on the back door are snapped shut, sealing the system with a sound watertight seal. The housing controls are made from stainless steel shafts and springs and are sealed by double O-rings as is the housing port. The control knobs and buttons are made of sturdy molded polycarbonate. The FD-40X flash sync port is a five-pin Nikonos type system which allows for full TTL coverage especially when using the Fantasea FSB800 Flash housing for the Nikon SB 800 Flash. Among the key features and controls for the FD-40X housing: Shutter Release Control Power Switch Exposure Compensation/Aperture Control Shooting Information Control Zoom Port Control Auto Exposure/Focus Lock / Protect Control Mode Dial Command Dial Multi Selector Control Delete Control Playback Zoom/Setting Control Thumbnail/Help Control Menu Control Playback Control Magnified Optical Viewfinder Interchangeable Ports System-including wide angle and macro ports Bulkhead and Hot shoe Connector for Strobe Double O-Ring Design on All Controls and Lens Ports Standard 5 Pin Nikonos Type TTL sync socket Specifications: Includes standard port (18-55 mm zoom lens) Overall Size is 220 x 300 x 230 mm (LxWxH) Total Weight is approximately 2.8kg Buoyancy (with camera) Slightly positive The Housing includes a one-year free D.E.P.P flood insurance policy. 6/11/2007 8:13:00 AMhttp://www.underwaterphotography.com/store/product.aspx?p=28786All HD housings have the same body design. The camera dictates where the controls are located. The camera also dictates out of water weight and length of body. Removable wings, for easy transportation. Also serves as a safety feature; simply remove the quick-release pin, slide the wing off and your housing becomes positive, causing it to rise to the surface. PLEASE SPECIFY CAMERA MODEL WHEN ORDERING12/8/2008 7:15:00 AMhttp://www.underwaterphotography.com/store/product.aspx?p=30683All HD housings have the same body design. The camera dictates where the controls are located. The camera also dictates out of water weight and length of body. Removable wings, for easy transportation. Also serves as a safety feature; simply remove the quick-release pin, slide the wing off and your housing becomes positive, causing it to rise to the surface. PLEASE SPECIFY CAMERA MODEL WHEN ORDERING2/18/2009 6:51:00 AMhttp://www.underwaterphotography.com/store/product.aspx?p=17446The ultra compact lite head is offered with 50 watt primary video lamp, and includes a separate 20 watt modeling/diving light. The ultra-wide 100 degree primary light coverage is free of any hot-spots. Includes ball arm and connecting cable1/31/2004http://www.underwaterphotography.com/store/product.aspx?p=30570</li><li>Industrys longest warranty — 3 years </li><li>BRS (Ballast Release System) for easy travel or if trouble occurs on a dive, simply pull the quick release pin on one of the wings, the wing and handle (ballast) release, the housing now becomes positive and shoots to the surface </li></ul> HD10s are designed to perform the best in conjunction with a wide angle lens. 2/9/2009 4:34:00 AMhttp://www.underwaterphotography.com/store/product.aspx?p=23997Also Accepts the Fuji S5 Pro Camera Without Modification The housing includes iTTL conversion circuitry that provides four 1/3 f/stop increments over or under flash compensation that is added to or subtracted from any compensation entered into the camera, or seven manual power settings in half-stop increments. All choices are obtained by simply rotating a knob on the housing back. Other strobes can be used, but will not provide iTTL functions of the conversion circuitry. Mount and sync cords for Nikonos and sync cords for Inon or Sea and Sea strobes are available. Camera Flash Compensation button can be activated by your index finger while your hand remains on the handle. Control for front FUNC button is provided; this control can be pulled up to operate depth of field preview. A control for Lens Release is also included. Stay depressed control operates the White Balance, ISO and Qual functions on top left of camera body, but the Mode dial under these buttons is not provided. Focus-mode (C/S/M) selector can be changed with a little finesse. A control is even provided to open the Card slot cover latch, and the tray is notched, allowing battery and card replacement without removing the camera from the tray. Port Not Included. 2/15/2006 2:21:00 PMhttp://www.underwaterphotography.com/store/product.aspx?p=23922The Aqua F6TTL is fully waterproof to 165 feet, all-weather electronic flash unit with thyristor circuitry and TTL exposure control with the Nikonos V. The Aqua F6TTL comes complete with flash arm, sync cord, wide angle diffuser, O-ring and silicone grease. <ul><li>Surface guide number of 125 at ISO 100 </li><li>U/W guide number of 28 at ISO 100 </li><li>Fast recycling (.5-10 seconds) </li><li>Manual full power and 1/4 power settings </li><li>Consecutive flash signal mode </li><li>Swivel/tilt head </li><li>Twin reflectors for wide coverage </li><li>Two sets of AA NiMH batteries and a charger are included</li></ul> 2/1/2006 2:55:00 PMhttp://www.underwaterphotography.com/store/product.aspx?p=29236NOTE:Housing does not accept the Nikon S610C camera. An included flash diffuser improves lighting quality when the cameras built-in flash is used. A portion of the cameras flash may be blocked by the lens port of the housing when shooting close up, resulting in a dark shaded area in the photo. For best results an external underwater strobe is recommended · Attach 46mm threaded IK6420.46 Ikelite W-20 and other lenses directly to the front of the housing port. · Attach 67mm threaded IK6420 Ikelite W-20, Inon Type II, and Epoque lenses using the IK9306.81 port adapter. · Bayonet style Inon UWL-105AD lenses are not recommended for use with these housings. Minimal vignetting (shading in the corners) will be present in the widest setting when using an external accessory lens. This can be eliminated by zooming in slightly. Slight softness around the edges of the photo in some situations is normal.1/12/2009 3:16:00 AMhttp://www.underwaterphotography.com/store/product.aspx?p=30579Description: All RED housings are built to order on a 4 to 6 week lead time. The camera for which the housing is being built is required. RED housings include external 4.3-inch 16:9 high-definition LCD. Customized housings must be ordered separately from standard products. To order your custom housing, or request a price estimate for a housing customized for your camera and to your specifications please contact our sales team.2/10/2009 4:01:00 AM